3/8" ID 1/2" OD. White Nylon

3/8" ID 1/2" OD. White Nylon

15' SS Cable, external thread swivel end. Requires Field Connector

Field Installed External Thread End Piece

Field Installed Internal Thread End Piece. Requires Threaded Rod or M6 Cap

For vertical material 3/8" to 1/2" Thick

For material 3/8" to 1/2" Thick

For material 3/8" to 1/2" Thick, 40lb load w/set screw, 100 lb w/pin

For material 1/8" to 1/4" Thick

For material 1/8" to 1/4" Thick

For material 1/8" to 1/4" Thick

For material 1/8" to 1/4" Thick

25lb Load

50lb Load

For material up to 1/4" Thick

For material up to 1/2" Thick, 40 lb w/set screw, or 100 lb w/pin in suspension. Includes pin, set screw, and countersunk fastener. Requires M6 anchor.

For material up to 1/2" Thick, 40 lb w/set screw, or 100 lb w/pin in suspension. Includes pin, set screw, and countersunk fastener. Requires M6 anchor.

For material up to 1/2" Thick

For material up to 1/2" Thick

For horizontal material 3/8" to 1/2" in gauge.

Anodized aluminum, 1/8" channel, 8' long

M6 Male threads with M8 Male threads. Useful for coupling Variable Angle Standoff to cable field adaptors.

8mm hammer drill mason ry bit, SDS shank for M6 concrete anchors.

M6 x 50mm Thread Length

M6 Washer

M6 x 35mm Diameter Cover Disk

M6 Hexagon Nut

M8 Threaded insert for Wood

Standoff for curved panels

Stainless Steel sleeve for threaded rod

2m length of M8 threaded rod

M6 x 25mm Rampa Screw (Threaded Insert for Wood)

M6 Threads, 8mm pre-drill, 15mm Internal Threads

Cable + Rod Installation Manual