Catalog: Cable And Rod

Standoff for curved panels

Stainless Steel sleeve for threaded rod

2m length of M8 threaded rod

For vertical material 3/8" to 1/2" Thick

For material 3/8" to 1/2" Thick

For material 3/8" to 1/2" Thick, 40lb load w/set screw, 100 lb w/pin

For material 1/8" to 1/4" Thick

For material 1/8" to 1/4" Thick

For material 1/8" to 1/4" Thick

For material 1/8" to 1/4" Thick

25lb Load

50lb Load

For material up to 1/4" Thick

For material up to 1/2" Thick, 40 lb w/set screw, or 100 lb w/pin in suspension. Includes pin, set screw, and countersunk fastener. Requires M6 anchor.

For material up to 1/2" Thick, 40 lb w/set screw, or 100 lb w/pin in suspension. Includes pin, set screw, and countersunk fastener. Requires M6 anchor.

15' SS Cable, external thread swivel end. Requires Field Connector

Field Installed External Thread End Piece

M6 x 25mm Rampa Screw (Threaded Insert for Wood)

Field Installed Internal Thread End Piece. Requires Threaded Rod or M6 Cap

For material up to 1/2" Thick

For material up to 1/2" Thick

Anodized aluminum, 1/8" channel, 8' long

M8 Threaded insert for Wood

3/8" ID 1/2" OD. White Nylon

3/8" ID 1/2" OD. White Nylon

M6 Male threads with M8 Male threads. Useful for coupling Variable Angle Standoff to cable field adaptors.

8mm hammer drill mason ry bit, SDS shank for M6 concrete anchors.

For horizontal material 3/8" to 1/2" in gauge.

Stainless steel hinged double panel connector that allows you to connect panels at a 90 degree angle on cable.

M6 Threads, 8mm pre-drill, 15mm Internal Threads

M6 x 50mm Thread Length

M6 Washer

M6 x 35mm Diameter Cover Disk

M6 Hexagon Nut

Cable + Rod Installation Manual