Catalog: Versa Divider

M6 x 25mm Rampa Screw (Threaded Insert for Wood)

Anodized Aluminum w/M8 Threads. Includes countersunk fastener and locating pin. Requires T-Nut when used with Versa.

Anodized Aluminum w/M8 Threads. Includes countersunk fastener and locating pin. Requires T-Nut when used with Versa.

Anodized Aluminum w/M8 Threads. Includes countersunk fastener and locating pin. Requires T-Nut when used with Versa.

Anodized Aluminum w/M8 Threads. Includes countersunk fastener and locating pin. Requires T-Nut when used with Versa.

4" Aluminum bottom plate. Includes mounting screws. Requires M6 anchors.

4" Plate, requires Barrel Nut and Threaded Rod. Includes mounting screws.

1" Aluminum Barrel Nut, to be used with the threaded rod and top plate.

Aluminum side bracket. Includes mounting screws. Fits panels up to 10mm (3/8").

Oval Cap for top of profile. Includes screws.

M10 Steel threaded rod. Max extension of 6" recommended.

Aluminum Profile. Additional shipping fees may apply. Specify length in inches.

10" Steel Base, 18 lbs. Supports Versa heights up to 6'.

Includes aluminum top plate, aluminum barrel nut, stainless M10 threaded rod and mounting screws. Requires M6 anchors for permanent fastening.

T-Nut for Versa system required to attach spiders and barrels to Versa

Hinged side bracket. Includes mounting screws. Fits 16mm Duo or 19mm (3/4") Pep.

Hinged side bracket. Includes mounting screws. Fits panels up to 10mm (3/8").

Includes mounting screws. Fits panels up to 1/2". Requires 2 per shelf.

Aluminum Profile. Additional shipping fees may apply. Specify length in inches.

Aluminum side bracket used on walls to hold panels

Comes off either Versa profile at a 45 degree angle. Includes mounting screws. Fits panels up to 3/8".

Square cap for top of square profile. Includes screws.

Aluminum Side Bracket. Includes mounting screws. Fits 16mm Duo or 19mm (3/4") Pep.

2-prong key for tightening low profile caps. Recommend 1 key for every 5 caps.

Standard 2-piece cap head kit with all necessary washers and bushings for 1/4" gauge material and below; no rod included. Will work with Varia and Duo, as other materials do not come this thin.

Low-profile 2-piece cap head kit with all necessary washers and bushings for 1/4" gauge material and below; no rod included. Will work with Varia and Duo, as other materials do not come this thin. Must also order low-profile cap keys (part #3-15-1704).

Standard 2-piece cap head kit with all necessary washers and bushings for 5/16" gauge material and above; no rod included. Will work with all 3form material types.

Low-profile 2-piece cap head kit with all necessary washers and bushings for 5/16" gauge material and above; no rod included. Will work with all 3form material types. Must also order low-profile cap keys (part #3-15-1704)

Countersunk assembly compatible with all 3form materials 5/16" gauge and higher. Screw needs to be ordered separately depending on length.

4-sided elliptical profile, anodized aluminum. Indicate Number of Pieces and Length in space below. Additional shipping fees may apply. Specify length in inches.

1-sided profile, anodized aluminum. Indicate Number of Pieces and Length in space below. Additional shipping fees may apply. Specify length in inches.

Special plate to connect Slim profile horizontally to other Versa profiles

8' anodized aluminum cover for any exposed Versa slots

Anodized aluminum cover for 4" bottom plate to conceal screws, for Blade profile only

4" Aluminum bottom plate. Includes mounting screws. Requires M6 anchors.

Special hinge hardware for Versa partition door installtion

Special Aluminum profile that acts a stop and catch for door latch

14" Aluminum 2-piece profile that snaps to cover the top pressure fit assembly

Floor plate with pivoting bearings and hardware to create a fully pivoting panel

Anodized aluminum cover for 4" bottom plate to conceal screws, for Oval profile only