|
|
|
PANEL LAYOUT AND
OVERALL SIZE
Determine the overall size of frame the opening of the space in which you wish
to install your partition or wall and how you would like to configure the
panes within the space.
|
 |
|
CHANNEL OPTIONS
3form Frame offers 2 different channel conditions. The thicker H-Channel is
required for surrounding all glass panes, structural vertical segments
(recommended every 4'), and horizontal spans longer than 6'. For
spans 6' or less in a horizontal section or non-structural vertical segments,
the smaller mullion is suitable.
|
 |
|
JOINT CONDITIONS
The two primary channel types, the H-Channel and the mullion, create three
primary joint conditions.
|
 |
|
EDGE CONDITIONS
Depending on the edge condition, there are three options. A floor adaptor, a
wall adaptor, and an optional face cover that creates a slight reveal along
an exposed edge.
|
 |
|
FINISH OPTIONS
3form frame is available in 4 standard finishes.
|
 |
ANCHOR CONDITIONS
3form frame may be attached to wood or concrete with the included fasteners.
Please specify substrate condition when submitting quote request.
TECHNICAL INFORMATION
3form frame is designed to primarily be used in a fully framed situations where
it is attached to a rigid substrate on all four sides, including thetop. Please
keep in mind the following limitations when planning your installation.
Bottom-Top Attachment
9' Max Height (unlimited length)
Four Sided Attachment
9' Max Height (unlimited length)
10' Max Height, 12' Max Length
10' Max Height, 12' Max Length
Panel Size
1/4" ecoresin - 4'x 6'
1/4" Glass - 4' x 6'*
3/8" ecoresin - 4' x 8'
3/8" Glass - 4'x 4'*
*Total square feet indicated, 24 sq. ft. (1/4" glass) and 16 sq. ft. (3/8" glass), may be accomodated in certain alternate configurations provided the vertical dimension of the pane does not exceed the limits indicated (6' and 4' respectively).
1/4" Glass - 4' x 6'*
3/8" ecoresin - 4' x 8'
3/8" Glass - 4'x 4'*
*Total square feet indicated, 24 sq. ft. (1/4" glass) and 16 sq. ft. (3/8" glass), may be accomodated in certain alternate configurations provided the vertical dimension of the pane does not exceed the limits indicated (6' and 4' respectively).
Mullion Length
6' Max Length
Requires reinforcement at every 4' with H-Channel or every 2' with mullion
channel
