3form Hardware Catalog: Slide04

Slide04 Bottom Shoe, 4ft.
0-15-0019

3 profiles creating the bottom shoe for fixed panel, standard 8ft

Slide04 Top Frame Extrusion, 4ft.
0-15-0031

Extrusions for top frame, standard 4ft length

Slide04 Bottom Frame Extrusion, 4ft.
0-15-0034

Extrusions for bottom frame, standard 4ft length

Slide04/Slide05 Mullion, 4ft.
0-15-0037

Mullion extrusions for Slide04 and Slide05 doors, 4ft length

Slide04/Slide05 Rectangular Side Profiles, 9ft.
0-15-1770

Rectangular-shaped profile extrusions for frame sides of Slide04 and Slide05 door

Slide04/Slide05 Rectangular Side Profiles, 18ft.
0-15-1771

Rectangular-shaped profile extrusions for frame sides of Slide04 and Slide05 door

Slide04/Slide05 Rectangular Side Profiles, 8.5ft.
0-15-1780

Rectangular-shaped profile extrusions for frame sides of Slide04 and Slide05 door

Premium inserts cannot be used with this product.

Slide04/Slide05 Rectangular Side Profiles, 10.5ft.
0-15-1781

Rectangular-shaped profile extrusions for frame sides of Slide04 and Slide05 door

Slide04 Top Frame Extrusion, 8ft.
0-15-1783

Extrusions for bottom frame, standard 8ft length

Premium inserts cannot be used with this product.

Slide04 Bottom Frame Extrusion, 8ft.
0-15-1784

Extrusions for bottom frame, standard 8ft length

Premium inserts cannot be used with this product.

Slide04/Slide05 Mullion, 8ft.
0-15-1786

Mullion extrusions for Slide04 and Slide05 doors, 8ft length

Premium inserts cannot be used with this product.

Slide04/Slide05 T-Shaped Side Frame Profile, 8.5ft.
0-15-1787

T-Shaped Profile extrusions for vertical sides of the door, standard 8.5ft

Premium inserts cannot be used with this product.

Flush Bolt Kit for Slide05 or Slide04 with Recessed Track
3-15-0005-K (kit contents)

Flush bolt secures door to floor for Slide05 or Slide04 with recessed track. Comes with flush bolt pin and strike plate for floor. Side profile fabrication may have a small charge. For extra Strike Plates, order 3-15-0068.

Slide04 Top Roller
3-15-0009

Top roller for floor mount system, bears no weight

Slide04 Bottom Roller
3-15-0010

Bottom roller for floor mount system, weight bearing roller

Slide04/Slide05 Screw Cover
3-15-0011

Aesthetic plastic cover for screw holes on doors

Slide04/Slide05 Dust Brush
3-15-0012

Brush stopper for the edge of the door, 118" length

Slide04/Slide05 Frame Screw
3-15-0013

Screw to hold frame together

Slide04 Top Track End Cap
3-15-0014

Single end cap for top track

Slide04 Wall Mount Bracket
3-15-0015

Bracket to mount top track to wall, single bracket

Slide04 Floor Track End Cap
3-15-0017

Single end cap for floor track

Slide04 Connector for top tracks
3-15-0018

Slide04 Connector for top tracks

Slide04 Telescoping Catch Drill Template for 3-15-4444-K
3-15-0021

Drill template for double & triple track telescoping catch, part # 3-15-4444-K. Holes must be drilled on-site. Order one template for every 3 catch assemblies.

Slide04/05 Door Handle
3-15-0023

Slide04/05 Door Handle

Slide04/05 Door Handle Kit
3-15-0023-K (kit contents)

Handle for Slide04/05 door. Works with both T-shape and Rectangular profiles. Drill holes to .116" for screw attachments.

Door Receiver Plate Kit
3-15-0024-K (kit contents)

Order this kit for biparting doors with latch or lock. Comes with receiver plate, screws, and dust brush to be applied on the receiving door. Door extrusion needs fabrication at an additional cost.

1.5" x 2" barrel, M10 threads
3-15-0031

1.5" x 2" barrel, M10 threads

Slide04/Slide05 Mullion
3-15-0037

Horizontal Mullion for doors or fixed panels

Slide04 Top Track, 8ft.
3-15-0040

Top non-weight bearing track of floor mounted door, 8ft standard lengths

Slide04 Floor Track, 8ft.
3-15-0042

Bottom weight-bearing track track of floor mounted door, 8ft standard lengths

Slide04 Recessed Floor Track
3-15-0044

Bottom weight-bearing track of floor mounted door, 8ft standard lengths w/6mm recess into floor

Slide04 Top Track End Cap, Double
3-15-0046

Slide04 Top Track End Cap, Double

Slide04 Top Track End Cap, Triple
3-15-0047

Slide04 Top Track End Cap, Triple

Slide04 Floor Track End Cap, Double
3-15-0048

Slide04 Floor Track End Cap, Double

Slide04 Floor Track End Cap, Triple
3-15-0049

Slide04 Floor Track End Cap, Triple

Slide04 Top Track, Double
3-15-0050

Slide04 Top Track, Double

Slide04 Surface Floor Track, Double
3-15-0052

Slide04 Surface Floor Track, Double

Wall-Mounted Door Receiver Plate
3-15-0053

Receiver plate for Slide04 or Slide05 wall-mounted doors for latch or lock connection

Premium inserts cannot be used with this product.

Slide04 Surface Floor Track, Triple
3-15-0054

Slide04 Surface Floor Track, Triple

Slide04 Top Track, Triple, 8ft.
3-15-0056

Slide04 Top Track, Triple, 8ft length

Slide04 Top Track, Triple
3-15-0058

Slide04 Top Track, Triple

Slide04 Connector for bottom tracks
3-15-0060

Slide04 Connector for bottom tracks

Slide04 Carpet Clip, 8ft.
3-15-0061

Slide04 Carpet Clip, 8ft length. Works with recessed track to attach into carpet. Minimum carpet depth 3/8 in or shim floor to flush height.

Slide04 Stop
3-15-0063

Stop for each end of top track

Slide04 Cover Profile for floor tracks
3-15-0064

Slide04 Cover Profile for floor tracks

Slide04 Telescoping Catch Drill Template for 3-15-0073-K
3-15-0067

Drill template for multiple single track telescoping catch, part # 3-15-0073-K. Holes must be drilled on-site. Order one template for every 3 catch assemblies.

Slide04 Pocket Door Pull
3-15-0069-K (kit contents)

Pull that gets screwed into the Slide04 and Slide05 T-shaped or Rectangular Shaped profile for a pocket door handle. Requires fabrication of profile at a small cost.

Slide04 Telescoping Catch Assembly for Multiple Single Tracks
3-15-0073-K (kit contents)

2 telescoping catches (install one on each bypassing door). Also order drill template for installation, 3-15-0067, to drill frame and install on-site. Only works with Rectangular Side Profile and multiple single tracks.

Slide 04 Stop
3-15-0084

Stop for each end of top track, replaces 3-15-0063.

3/8" Glazing Channel
3-15-1455

GLAZING CHANNEL FOR 3/8" GAUGE MATERIAL, BLACK 96" long. To glaze a length of panel longer than 96", multiple glazing channel segments can be cut and placed together in the extrusion.

1/4" Glazing Channel
3-15-1456

GLAZING CHANNEL FOR 1/4" GAUGE MATERIAL, BLACK 96" long. To glaze a length of panel longer than 96", multiple glazing channel segments can be cut and placed together in the extrusion.

Wall Receiver Plate Kit
3-15-1693-K (kit contents)

Order this kit for hooking doors into the wall. Comes with wall plate, screws, and clear bumpers for the side of the door.

Slide04 Flush Bolt Strike Plate
3-15-1694

Extra Strike plate (or floor plate) used to secure Flush Bolt (3-15-1694-K) pin to the floor. Screws appropriate for the substrate must be provided by the installer.

Slide04 Flush Bolt Kit
3-15-1694-K (kit contents)

Flush bolt secures door to floor for Slide04 with single surface tracks. Comes with flush bolt pin and strike plate for floor. Side profile fabrication may have a small charge. For extra Strike Plates, order 3-15-1694.

Slide04 Roller Reinforcement Plate
3-15-1930

Slide04 Roller Reinforcement Plate

Premium inserts cannot be used with this product.

Slide04 Wall Mount End Cap
3-15-1986

End cap for Slide04 door system in a wall-mount configuration. Part is reversible for left- or right-side attachment

Premium inserts cannot be used with this product.

Slide04 Telescoping Catch Assembly for Double & Triple Tracks
3-15-4444-K (kit contents)

2 telescoping catches (install one on each bypassing door). Also order drill template for installation, 3-15-0021, to drill frame and install on-site. Only works with Rectangular Side Profile and double & triple tracks.

Slide04/05 Actuator Lock Kit - Right Side
3-15-4445-K (kit contents)

To be used with 3-15-4450-K for locks on right side of door (if looking down edge of door). Comes with handles on both sides. Fabrication of door and assembly of lock to be done at factory at an added cost.

Slide04/05 Actuator Lock Kit - Left Side
3-15-4446-K (kit contents)

To be used with 3-15-4450-K for locks on left side of door (if looking down edge of door). Comes with handles on both sides. Fabrication of door and assembly of lock to be done at factory at an added cost. Kit with receiver plate.

Slide04/05 Latch Kit - Right Side
3-15-4447-K (kit contents)

Latch on the right side of door (if looking down edge of door). Works only with rectangular profile. Comes with handles on both sides. Option of adding lock to left side of door. Door fabrication and assembly to be done at factory at an added cost. Order

Slide04/05 Latch Kit - Left Side
3-15-4448-K (kit contents)

Latch on the left side of door (if looking down edge of door). Works only with rectangular profile. Comes with handles on both sides. Option of adding lock to right side of door. Door fabrication and assembly to be done at factory at an added cost. Order

Slide04/05 Latch Kit - Both Sides
3-15-4449-K (kit contents)

Latches on both sides of door. Works only with rectangular profile. Comes with handles on both sides. Door fabrication and assembly to be done at factory at an added cost.

Key Lock Kit for Slide04/05
3-15-4450-K (kit contents)

Lock comes with key and must be used with rectangular profile. Must also order either 3-15-4445-K, 3-15-4446-K, 3-15-4447-K, or 3-15-4448-K depending on side of door lock and configuration desired. Will need fabrication of profile at a small cost. (Order

Select your Country / Language

Hardware

3form Hardware Catalog: Slide04